WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. SAFETY Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. 3. Avoid direct Eye exposure. 4. Do not expose the tool to rain or wet conditions. 5. Stay alert, watch what you are doing and use common sense when operating the tool. Do not use while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention may result in serious personal injury. 10.
Specifications SAFETY Measurement Range -36.4ºF to 968ºF (-38ºC to 520ºC) Accuracy ± 2% above 32ºF ± 4.5% below 31ºF Response Time 1 Sec Spot Size Ratio 8:1 (Distance : Spot size) Needed Batteries 2 AAA (not included) LASER LIGHT AVOID DIRECT EYE EXPOSURE Max Output: < 1 mW, Wavelength: 650 nm CLASS II LASER PRODUCT This product complies with 21 CFR 1040.10 and 1040.11 - Diode Mfr.
Operating Instructions SAFETY Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. General Operating Instructions 2. Push the ºF/ºC button to toggle between Fahrenheit to Celsius, and to recover the last reading when in OFF mode. 3. Squeeze the Trigger and move the laser to see a constant temperature reading and max reading. 4.
Maintenance and Servicing SAFETY Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and remove the batteries from the Laser Thermometer before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If damage is noted, have the problem corrected before further use.
Parts List and Diagram Description Front Cover Trigger Battery Cover Front Mass RMASS (Aluminium Alloy) Laser Holder-B Qty 1 1 1 1 1 1 Part 7 8 9 10 11 12 Description TPI RMASS PCB LCD LCD Rear Cover Switch Button Qty 1 1 1 1 1 1 MAINTENANCE OPERATION SETUP 1 2 3 4 5 6 SAFETY Part Item 61894 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.