Product manual

Page 5For technical questions, please call 1-888-866-5797.Item 61894
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
General Operating Instructions
Note: Do not expose this product to strong
electromagnetic fields, such as those generated
by an arc welder, induction heater, etc.
Note: When moving the Thermometer to an area
with significantly different ambient temperature,
allow the unit to adjust to the new ambient
temperature for 30 minutes before use.
1. Squeeze the Trigger to activate the
Laser and temperature reading.
2. Push the ºF/ºC button to toggle between
Fahrenheit to Celsius, and to recover
the last reading when in OFF mode.
3. Squeeze the Trigger and move the
laser to see a constant temperature
reading and max reading.
4. Release the Trigger to display the
most recent temperature reading, or to
allow 15 seconds for auto shut off.
5. Non-reflective surfaces will yield a more
accurate reading than reflective surfaces.
Duct tape (sold separately) can be applied
to reflective surfaces in order to get a better
measurement. Allow sufficient time for the
tape to match the temperature of the surface
it is applied to before trying to get a reading.
6. The object being tested should be
larger than the size calculated by the
Field of View diagram, below.
7.
Field of View
Distance to Spot Size = 8:1
Spot Center
Distance
3" diameter at
24" distance
2" diameter at
16" distance
1" diameter at
8" distance
Field of View
Distance to Spot Size = 8:1
Spot Center
Distance
3" diameter at
24" distance
2" diameter at
16" distance
1" diameter at
8" distance
When finished, release the Trigger.
The last temperature will display for 15
seconds, then the unit will shut off.
8. Clean the lens with dry compressed air
and wipe the rest of the unit down with a
soft, damp cloth, then store the product
indoors out of children’s reach.
9. To prevent accidents, turn off the
tool and disconnect its power supply
after use. Clean, then store the tool
indoors out of children’s reach.
SAFETYOPERATIONMAINTENANCE SETUP