Product manual

Page 7For technical questions, please call 1-888-866-5797.Item 60693
Continuous Monitors
Some of the vehicle components or systems are continuously
tested by the vehicle's OBD II system, while others are tested
only under specific vehicle operating conditions. The continuously
monitored components listed below are always ready:
1. Misfire
2. Fuel System
3. Comprehensive Components (CCM)
Once the vehicle is running, the OBD II system is continuously
checking the above components, monitoring key engine sensors,
watching for engine misfire, and monitoring fuel demands.
Non-Continuous Monitors
Unlike the continuous monitors, many emissions and engine
system components require the vehicle to be operated under
specific conditions before the monitor is ready. These monitors
are termed non-continuous monitors. For different ignition
type engines, the available monitors are different too.
The Following Monitors Are To Be Used For
Spark Ignition (Gasoline) Engines Only:
1. EGR System
2. O2 Sensors
3. Catalyst
4. Evaporative System
5. O2 Sensor Heater
6. Secondary Air
7. Heated Catalyst