user manual

SKU 94444 PAGE 3 Rev 05/06
ASSEMBLY AND CAUTIONARY INSTRUCTIONS
1. The Wire Pet Cage (#1) comes collapsed for transportation and storage. This strong,
durable steel Wire Pet Cage has good ventilation and visibility for your pet and is excellent
for home and travel use. (See Figure 1).
Figure 1
2. Open collapsed Wire Pet Cage (#1). Lift Back Side (#2) and snap into Latches (#5) securely.
(See Figure 2 & 3).
3. Lay Tray (#8) on the bottom of the Cage and latch sides around Tray. Please
note that Tray MUST be inside Wire Pet Cage before the Cage is fully assembled.
4. Lift Front Side (#3) with Pet Cage Door (#7) and snap into Latch (#4) (See Figure 4).
Be sure all sides are snapped into place. (See Figure 7).
5. Familiarize yourself with the Spring Plastic Hook Latch (#6) before placing animal in Wire
Pet Cage (#1). Close Door (#7). Hook Latch (#6) points down. To lock and unlock, push
black Hook Latch, lift up and drop in place. Reverse to unlock. Always check to make sure
Door is properly closed and locked. (See Figure 5, 6 , 7).
Figure 2
Figure 3
Figure 4
#4
#5
#7
Figure 5
#6
Figure 6
Figure 7
▼
6. This is a temporary animal Pet Cage only. Always check that Hook Latch (#6) is locked after
placing animal in Cage. Have water in Cage for your pet and never leave animal unattended in
hot car. A piece of carpet remnant or appropriate padding (not included) should always be used
to protect pet’s paws.
▼
▼