user manual

OPERATING INSTRUCTIONS
NOTE:
For additional references to the parts discussed in the following pages,
refer to the Assembly Diagram on page 18 of this manual.
Pre-Start Checks:
1. Before operation, it will be necessary to refer to the Engine manufacturer’s
Operation, Maintenance, and Parts manual
(included) for detailed information
about starting, running, and stopping the Engine.
2.
IMPORTANT! Engine oil MUST be added to the Engine’s crankcase prior to
starting and running the Engine. Failure to add oil, according to the Engine
manufacturer’s recommendations, will damage the Engine and void its warranty.
3. Check to make sure the Engine’s “ON/OFF” Switch is in its “
OFF” position.
(See Figure C.)
4. Unscrew and remove one of the Engine’s Oil Dipsticks located on both sides at
the bottom of the Engine Crankcase. Fill the Engine’s crankcase with the proper
type and amount of engine oil as recommended by the Engine manufacturer.
Then, replace the Oil Dipstick. (See Figure C.)
SKU 92863 For technical questions, please call 1-800-444-3353. PAGE 12
“ON/OFF”
SWITCH
OIL
DIPSTICK
FIGURE C