user manual

SKU 92863 For technical questions, please call 1-800-444-3353. PAGE 14
FUEL CHOKE
“ON/OFF” SWITCH
FUEL VALVE (25)
STARTER ROPE
FIGURE E
Powering Tools And Equipment:
1. Prior to powering tools and equipment, make sure the Generator’s rated voltage,
wattage, and amperage capacity (120V/20 AMPs) is adequate to supply all
electrical loads that the unit will power. If powering exceeds the Generator’s
capacity, it may be necessary to group one or more of the tools and/or equipment
for connection to a separate generator.
2. Once the Generator is running, simply connect the Power Cords of 120 volt
powered tools and equipment into the 120 volt Dual Outlets (35).
(See Figure F,
next page.)