user manual

2. Store idle generators out of reach of children and other untrained persons.
Generators are dangerous in the hands of untrained users.
3. Maintain the Generator with care. Do not use a damaged Generator. Tag
damaged Generators “Do not use” until repaired.
4. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the generator’s operation. If damaged,
have the Generator serviced before using. Many accidents are caused by
poorly maintained Generators.
5. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one Generator may become
hazardous when used on another Generator.
SERVICE
1. Generator service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
2. When servicing a Generator, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SKU 92863 For technical questions, please call 1-800-444-3353. PAGE 5
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
2. WARNING! People with pacemakers should consult their physician(s)
before using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker. In addition,
people with pacemakers should adhere to the following: Caution is necessary
when near the coil, spark plugs, or distributor of a running engine. The engine
should always be off if adjustments are to be made to the distributor.
3. Industrial applications must follow OSHA requirements.