Product manual

Page 2 For technical questions, please call 1-800-444-3353. SKU 40749
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of
this document including
all text under subheadings
therein before set up or
use of this product.
Removal
1.
Jackscrew (3)
Figure 1
Puller Body (1)
Coat Jackscrew (3) with lubricant
and thread into Puller Body (1).
2.
Figure 2
Button (4)
Push Button (4) or appropriate
Puller Pin (7 or 9) into
hole in Jackscrew.
3.
Jaws (2a)
Figure 3
Assemble Jaws (2a) over Puller
Body (1) and pulley ange.
4.
Sleeve (2b)
Figure 4
Hand tighten Jackscrew
and slide Jaw Sleeve (2b)
into position over jaws.
5.
Figure 5
Hold Puller Body (1) with 1"
or adjustable wrench (sold
separately). Turn Jackscrew
with 1/2" socket wrench (sold
separately) until pulley is removed.
REV 11c
Instructions