Product manual

ManualsBrandsHarbor Freight Tools ManualsDo-It-Yourself toolsR134A

AIR VACUUM PUMP WITH

R134A & R12/22

Model

96677

SET UP AND OPERATING INSTRUCTIONS

To prevent explosion, serious injury, and death:

Service of air conditioning systems must be done

only by trained and experienced technician to avoid



Technicians opening refrigeration circuit in

automotive air conditioning systems MUST be



procedures in compliance with section 609 of Clean



For additional information regarding ozone depletion

and air conditioning service regulations, visit EPA’s



•





Distributed exclusively by Harbor Freight Tools



Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2007 by Harbor Freight Tools



manual or any artwork contained herein may be reproduced in any shape or form



For technical questions or replacement parts, please call 1-800-444-3353.

Summary of content (7 pages)

PAGE 1
Air vacuum pump with r134A & r12/22 Model 96677 Set up And Operating Instructions To prevent explosion, serious injury, and death: • Service of air conditioning systems must be done only by trained and experienced technician to avoid overfilling. • Technicians opening refrigeration circuit in automotive air conditioning systems MUST be certified in refrigerant recovery and recycling procedures in compliance with section 609 of Clean Air Act Amendments of 1990.
PAGE 2
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
PAGE 3
c. Store idle pneumatic tools out of the reach of children and do not allow persons unfamiliar with the pneumatic tool or these instructions to operate it. Pneumatic tools are dangerous in the hands of untrained users. d. Maintain pneumatic tools. Check for misalignment or breakage of parts and any other condition that may affect the pneumatic tools operation. If damaged, have it repaired before use. Many accidents are caused by poorly maintained tools. e.
PAGE 4
understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Save these instructions. Specifications Air Pressure Range 75-180 PSI Recommended Air Pressure 75 PSI Air Consumption 4.2 CFM @ 90 PSI Vacuum Capacity 28.
PAGE 5
this Air Vacuum Pump and run for 10 minutes to further raise the vacuum level in the A/C system. 3. Attach an air pressure hose (not included) to the Air Fitting either by threading it directly on, or by using a quick release fitting. 4. As appropriate, attach the R-134a or R12/22 manifold fitting to the AC drain port of the vehicle. This is a quick release fitting.
PAGE 6
PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product.
PAGE 7
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.