Product manual

GEAR PULLER - THREE JAW

Model

08832

Distributed Exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight

Tools.

For technical questions please call 1-800-444-3353

Size Maximum Pulling Force

3” > 2.5 Ton

4” > 2.5 Ton

6” > 3.5 Ton

SAVE THIS INSTRUCTION SHEET

Keep this instruction sheet for the safety warnings and precautions, assembly, operating, inspec-

tion, maintenance and cleaning procedures. Keep this instruction sheet and the receipt in a safe and

dry place for future reference.

UNPACKING

When unpacking, check to make sure all parts shown on the photo are included. If any parts

are missing or broken, please call Harbor Freight Tools at the number shown on the front page of this

instruction sheet as soon as possible.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read

warning labels on prescriptions to determine if your judgment or reexes are impaired while taking

drugs. If there is any doubt, do not attempt to use this product.

USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses when using this

product. ANSI approved safety impact eye glasses are available from Harbor Freight Tools.

DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with this

product. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear

PAGE 1
GEAR PULLER - THREE JAW Model 08832 Distributed Exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright© 2007 by Harbor Freight Tools. All rights reserved. No portion of this instruction sheet or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions please call 1-800-444-3353 Size 3” 4” 6” Maximum Pulling Force > 2.
PAGE 2
a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows. 4. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately. When servicing, use only identical replacement parts.