Product manual

Page 12 For technical questions, please call 1-888-866-5797. Item 62365

SAFETY SETUP OPERATION MAINTENANCE

Manual Start

1. Turn the Fuel Valve Lever to its “OPEN” position.

2. Turn the Ignition Switch to its ON or RUN position.

3. Then, turn the engine Choke Lever to its “START”

position. Set the Choke Lever in the “RUN” position

when starting a warm engine.

4. Grip the Starter Handle of the Engine loosely and pull it

slowly several times to allow the gasoline to flow into

the Engine’s carburetor. Then pull the Starter Handle

gently until resistance is felt. Allow Cable to retract fully

and then pull it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap back against

the engine. Hold it as it recoils so it doesn’t hit the engine.

5. Allow the Engine to run for several seconds.

Then, if the Choke Lever is in the CHOKE position,

move the Choke Lever very slowly to its RUN position.

Note: Moving the Choke Lever too

fast could stall the engine.

OFF