Product manual

Page 14 For technical questions, please call 1-888-866-5797. Item 62365
SAFETY SETUP OPERATION MAINTENANCE
Changing Trencher Arm Positions
This Trencher can be used with two arm positions. See Figure E and Figure F.
Cylinder (26)
Pin
(29)
Main
Boom
(36)
Boom
Pivot
(38)
upper
hole
Figure E: Shallow Position (5 1/2’ downward reach)
Cylinder (26)
Boom
Pivot
(38)
Main
Boom
(36)
Pin
(29)
lower
hole
Figure F: Deep Position (7’ downward reach)
1. To use the Shallow Position, with a 5 1/2’
downward reach, do as follows:
a. While the end of the Boom is
supported, remove the Pin (29).
b. Align the Cylinder with the upper hole.
c. Insert the Pin (29), and secure it
with the Hair Pin Clip (31).
2. To use the Deep Position, with a 7’
downward reach, do as follows:
a. While the end of the Boom is
supported, remove the Pin (29).
b. Align the Cylinder with the lower hole.
c. Insert the Pin (29), and secure it
with the Hair Pin Clip (31).