Specifications Load Capacity 350 lb. Dimensions 52-3/4"L (extended) x 12-3/4"H Crossbar Width 49" Hitch Receiver Size Fits 2" Square Receivers Note: A class 3 truck hitch is required. Important Safety Information General Safety 1. Make sure the area in which the Extender is assembled is clean and well lit. Cluttered or dark areas invite accidents. 2. Keep children and bystanders away while assembling the Extender. 3.
Service Have this Extender serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the Extender is maintained. Specific Safety Rules 1. Follow DOT guidelines for installation and use. 2. Do not exceed 350 lb. capacity, evenly distributed. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 9. Maintain labels and nameplates on the Extender. These carry important safety information.
Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 7. Turn vehicle’s ignition OFF, set parking brake, and chock wheels before assembly. Assembly 1.
Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY: Make sure the vehicle is turned off and in gear or park, with the emergency brake engaged and the wheels blocked. Make sure the Extender is secured onto the vehicle. Make sure the Extender is clean and dry before loading. Do not exceed this Extender’s maximum weight capacity of 350 pounds.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Remove load from the Extender before performing any maintenance or service. Do not use damaged equipment. If the Extender is damaged have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect the general condition of the Extender. Check for: 2. Clean the Extender after each use.
Parts List and Assembly Diagram Part 1 2 3 Description T-Support Angled Pin R-Pin Qty 1 2 2 Part 4 5 Description L-Extension Warning Flag (not shown) Qty 1 1 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed for illustration purposes only, and are not available individually as replacement parts. Item 69650 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.