Instruction Manual BS08 Black / White Camera with Night Vision Manual Revised 09g
Introduction This Weatherproof Security Closed Circuit TV Camera kit is designed to make installation as simple and quick as possible. However it is essential that the installer reads and fully understands the instructions and precautions contained in this manual before installing. The Weatherproof Security Camera kit includes: 1. Ultra Mini Black & White Camera with Built-in Microphone and Mounting Bracket 2. 80 ft. Camera Cable 3. Power Supply Adapter (120 V~ input, 7.5 VDC / 300 mA output) 4.
Caution 1. Do not open the camera housing to prevent damage. Warranty is void if housing has been opened. 2. Disconnect power supply before installation. 3. Verify that installation surface has no hidden utility lines before drilling or driving screws. 4. Wear ANSI-approved safety goggles and heavy-duty work gloves during installation. 5. Power adapter is not weatherproof and must be used only indoors. Installation a. Mount the camera on wall or ceiling using the supplied hardware. b.
Specifications TV System Power Requirements Image Effective Picture Element Scanning System Sync. Frequency EIA CCIR 7.5 VDC, 300 mA 1/4” CMOS Sensor 320 (H) x 240 (V) 2:1 Interlaced H: 15750 Hz, V: 60 Hz Sync. System Resolution S/N Radio IR Night Vision Minimum Illuminance 352 (H) x 288 (V) H: 15625 Hz, V: 50 Hz Internal 350 TV Lines 400 TV Lines More than 48 dB (AGC off) up to 10-12 ft. range 0 Lux AGC On AES 1/50~1/6000 Lens f=3.6 F=2.8 Gamma Correction Microphone Rainproof 0.