Installation Instructions

Accessories

How to Determine the

Number of Pieces Required

Measure structure perimeter.

Convert to decimal, divide by 10 and round up.

# of pieces needed: _______

Measure tops of all window and door cap openings.

Convert to decimal, divide by 10 and round up.

# of pieces needed: _______

Measure bottom of all areas where siding must be cut horizontally

(at the top of wall and under all door and window openings).

Convert to decimal, divide by 10 and round up.

# of pieces needed: _______

Measure span where all soffits return to wall.

Convert to decimal, divide by 12.5, and round up.

# of pieces needed: _______

For open eaves, multiply the pieces

calculated above by 2: _______

Measure around all openings (doors, windows and gable ends).

Convert to decimal, divide by 12.5 and round up.

# of pieces needed: _______

Measure length on all outside corners.

Convert to decimal, divide by 10 and round up.

# of pieces needed: _______

Measure length of all inside corners.

Convert to decimal, divide by 12.5 and round up.

# of pieces needed: _______

Measure bottom of sidewall where vertical siding is being installed.

Convert to decimal, divide total by 10 and round up.

# of pieces needed: _______

Measure span of all roof lines to determine total footage of fascia

required. Convert to decimal, divide by 12.5 and round up.

# of pieces needed: _______

Measure span from inside wall to end of roof line (typically 45°).

Convert to decimal, divide by 10 and round up.

# of pieces needed: _______

Starter Base 10'

Window/Door Cap 10'

Undersill Trim 10'

F-channel 12' 6"

J-channel 12' 6"

Outside Corner Post 10'

Inside Corner Post 12' 6"

Vertical Base Flashing 10'

Vinyl Fascia 12' 6"

H-channel 10'