Installation Sheet

Hole Pattern and Length Specifications
Specifications L A B D
24” 597 192 320 140
22” 547 224 224 81
20” 497 192 224 95
18” 447 160 192 101
16” 397 128 192 110.5
14” 347 128 128 85
12” 297 96 128 90
10” 247 169 - -
DRAWER MEMBER
CABINET MEMBER
303FU Series
Heavy Duty Slides
Installation Instructions
1. Cabinet Member Installation:
Press release clip to disconnect
drawer member from cabinet
member. Align cabinet member
(using level if necessary) and place
edge ush with the edge of the
cabinet. Attach to cabinet using 3
#8 x 7/16” screws. 5 screws can be
used for supporting heavy loads.
2. Drawer Member Installation:
Place front edge of each member
against the rear face of the drawer
front. Screw drawer member with 3
#8 x 7/16” screws.
3. Drawer Installation:
Align drawer members with cabinet
members and slide into cabinet.
When fully closed, the drawer slide
release clip will lock into place.
• Note:
Face Frame Bracket is optional and
can be used if drawer guide is not
supported in the bottom corner of
a cabinet opening.
Bossier City, LA
www.HardwareResources.com
Specifications L A B C D
24” 600 128 96 192 64
22” 550 128 96 128 64
20” 500 128 96 128 64
18” 450 128 96 – 128
16” 400 128 96 – 64
14” 350 128 – – 96
12” 300 128 – – 96
10” 250 64 – – 76