Installation Sheet

Assemble the vertical support:

Use included screws to fasten. Can be installed for left

hand or right hand use.

SCPO2-R

Pullout Cleaning Supply Caddy

Included: Tools Needed:Minimum Opening:

Phillips

Screw Driver

Tape

Measure

(optional)

¾” Screw (x4)

M4 10mm

Screw (x4)

1. Make sure the cabinet hinge will

not interfere with organizer when

installed

4. Align front of slide with inside lip

of cabinet

5. Screw slide frame into cabinet

with 4 included screws

2. Release slide by pushing the black

trigger UP on the LEFT side and

DOWN on the RIGHT side

6. Align and reinsert organizer into

slide frame

3. Remove organizer from slide

frame by pulling forward

7. Push organizer into slide frame

until it CLICKS into place

8. Slide plastic drip tray into bottom

of caddy

9. Hang caddy on vertical support

Installation Instructions

PAGE 1
SCPO2-R Pullout Cleaning Supply Caddy Installation Instructions Minimum Opening: Included: Tools Needed: ¾” Screw (x4) Phillips Screw Driver Assemble the vertical support: Use included screws to fasten. Can be installed for left hand or right hand use. Tape Measure (optional) 1. Make sure the cabinet hinge will not interfere with organizer when installed 2. Release slide by pushing the black 3.
PAGE 2
SCPO2-R Carrito de retiro para suministros de limpieza Chariot coulissant pour produits nettoyants ESP: Abertura mínima FR: Ouverture minimale ESP: Instrucciones de instalacion FR: Instructions d’installation ESP: Incluido FR: Inclus ¾” tornillo (x4) Vis de ¾ po (x4) ESP: Herramientas necesarias FR: Outils nécessaires ESP: destornillador phillips FR: Tournevis cruciforme (Phillips) ESP: cinta métrica (opcional) FR: Ruban à mesurer (optionnel) ESP: Armar el soporte vertical Utilice los tornillos inclui