Manualshelf

Installation Sheet

ManualsBrandsHardware Resources ManualsCabinet HardwareUSE58-500 Series 24 Inch Heavy Duty Full Extension Undermount Concealed Drawer Slides with 100 Pound Weight Capacity and Soft-Close - Pair
12
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll-free customer help line available weekdays between
7:00am and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun and drill bits. NOTE: If screw gun has a clutch, set
to lowest setting so as not to over tighten and/or strip screws
during installation.
USE58 Series
Undermount Slide
Installation Instructions
MAXIMUM DRAWER HEIGHT =
OPENING MINUS 19 MM 3/4”
Drawer Side Thickness Inside Cabinet Width Deduction
5/8” (16 mm) 3/8” (10 mm)
19/32” (15 mm) 15/32” (12 mm)
9/16” (14 mm) 9/16” (14 mm)
1/2” (13 mm) 5/8” (16 mm)
15/32” (12 mm) 23/32” (18 mm)
OUTSIDE DRAWER WIDTH CALCULATIONS
USE58-100 AND USE58-300 SERIES DRAWER BOX MINIMUM WIDTH (VARIES BY CLIP)
US-CLIP-6WZ US-CLIP-6W US-CLIP-4WZ US-CLIP-4W US-CLIP-2W US-CLIP-NR
5/8” (16 mm) material 7.25" 7.25" 7.25" 7.25" 6.25" 4.75”
1/2” (13 mm) material 7" 7" 7" 7" 6" 4.5”
FRONT HOLE PATTERN FRONT VIEW OF THE DRAWER INSIDE THE CABINET REAR NOTCH DIMENSIONS
6 mm
(1/4")
33 mm
(1-5/16")
9 mm
(11/32")
36.5 mm
(1-7/16")
24.5 mm
(31/32")
12.70 mm
(1/2")
7 x 9 mm
11 mm
(7/16")
7 mm
(9/32")
MINIMUM 32 mm
(1-1/4")
MAX DRAWER THICKNESS
INSIDE CABINET WIDTH
MIN. TOP CLEARANCE 6
(1/4")
OPENING
16 (5/8")
OUTSIDE DRAWER WIDTH
INSIDE DRAWER =
INSIDE CABINET WIDTH MINUS 42 (1-5/8")
OPENING MINUS 19 (3/4")
MAX. DRAWER HEIGHT =
BOTTOM CLEARANCE
12.70
(1/2")
6 mm
(1/4")
33 mm
(1-5/16")
9 mm
(11/32")
36.5 mm
(1-7/16")
24.5 mm
(31/32")
12.70 mm
(1/2")
7 x 9 mm
11 mm
(7/16")
7 mm
(9/32")
MINIMUM 32 mm
(1-1/4")
MAX DRAWER THICKNESS
INSIDE CABINET WIDTH
MIN. TOP CLEARANCE 6
(1/4")
OPENING
16 (5/8")
OUTSIDE DRAWER WIDTH
INSIDE DRAWER =
INSIDE CABINET WIDTH MINUS 42 (1-5/8")
OPENING MINUS 19 (3/4")
MAX. DRAWER HEIGHT =
BOTTOM CLEARANCE
12.70
(1/2")
6 mm
(1/4")
33 mm
(1-5/16")
9 mm
(11/32")
36.5 mm
(1-7/16")
24.5 mm
(31/32")
12.70 mm
(1/2")
7 x 9 mm
11 mm
(7/16")
7 mm
(9/32")
MINIMUM 32 mm
(1-1/4")
MAX DRAWER THICKNESS
INSIDE CABINET WIDTH
MIN. TOP CLEARANCE 6
(1/4")
OPENING
16 (5/8")
OUTSIDE DRAWER WIDTH
INSIDE DRAWER =
INSIDE CABINET WIDTH MINUS 42 (1-5/8")
OPENING MINUS 19 (3/4")
MAX. DRAWER HEIGHT =
BOTTOM CLEARANCE
12.70
(1/2")
INSIDE CABINET DEPTH INSIDE CABINET WIDTH
DRAWER DEPTH DRAWER WIDTH DRAWER HEIGHT
Verify drawer box is correct width
1. Determine Drawer Side Thickness
2. Drawer box width = Inside Cabinet Width minus proper Inside Cabinet Width Deduction (See chart below)
• For 5/8” drawer box material, subtract 3/8” from inside cabinet width.
• For 1/2” drawer box material, subtract 5/8” from inside cabinet width.
3. Example: A drawer box made of 5/8” material would measure 14-5/8” for an inside cabinet width of 15”.
USE58-500 SERIES MINIMUM WIDTH (VARIES BY CLIP)
5/8” (16 mm) material 8.25”
1/2” (13 mm) material 8”

Summary of content (2 pages)