Installation Manual User’s Guide Enviro Series Washdown Bench Scale © 2009 by Hardy Instruments, Inc.
Amendment Record Enviro™ Washdown Bench Scale Document Part Number 0596-0316-01 Revision B Hardy Instruments Inc. 9440 Carroll Park Drive, Suite 150 San Diego, CA 92121 Created 12/09 Created Document Revision A 12/09 Released Manual Disclaimer Every effort has been made to provide complete and accurate information in this manual.
Table of Contents Section 1 Introduction ..................................................................................................... 1 Assembly: ................................................................................................................... 1 Section 2 Enviro™ Bench Scale Model Numbers............................................................. 1 Section 3 Parts Replacement ...........................................................................................
Section 1 Introduction Enviro™ Bench Scales are stand-alone scale bases that may be used with any compatible Hardy Instruments Weighing Controller / indicator, including the Hardy Enviro™ Series Checkweigher. They are constructed of stainless steel and are designed to be used in a rugged and sanitary check weighing application. The load cells are made from either aluminum or stainless steel. This manual contains information on all Enviro™ bases to date. Hardy Instruments appreciates your business.
30277 30278 30279 30280 30281 29972 PLATFORM ASSY, HARDY 10x10 - 25# CAP PLATFORM ASSY, HARDY 12x12 - 30# CAP PLATFORM ASSY, HARDY 12x12 - 50# CAP PLATFORM ASSY, HARDY 18x18 - 50# CAP PLATFORM ASSY, HARDY 18x18 - 100# CAP Instrument Assy-IP69 Hardy Section 3 HIWDPS1010-0025 HIWDPS1212-0030 HIWDPS1212-0050 HIWDPS1818-0050 HIWDPS1818-0100 HICWM 25 30 50 50 100 NA Parts Replacement Load Cell Replacement, All Models 1. Remove power to the scale. 2. Gain access to the load cell cable. 3.
Bench Scale Parts: All Models Item # Part # Description 2 15081 Load Cell Aluminum 15082 Load Cell Aluminum 12 15083 Load Cell Aluminum 24, 40 15084 Load Cell Aluminum 60 15085 Load Cell Aluminum 100 2 4 Pound capacity 6 14961 Load Cell Stainless 6 14962 Load Cell Stainless 12 14963 Load Cell Stainless 24, 40 14964 Load Cell Stainless 60 14965 Load Cell Stainless 100 14966 Load Cell Stainless 200 14948 Load Cell Cover 6, 12, 24, 40, 60 14994 Load Cell Cover 100, 2
Section 4: P Item # Part # Description Pound capacity 7 15031 Load Cell Block (upper & lower) 100 AL (16 x 18) 7 15030 Load Cell Block (upper & lower) 200 AL (16 x 18) 7 14947 Load Cell Block (upper & lower) 6, 12, 24 SS 7 14947 Load Cell Block (upper) 40, 60 SS 30 15034 Load Cell Block (lower) 40, 60 SS 7 15031 Load Cell Block (upper & lower) 100 SS (16 x 18) 7 15031 Load Cell Block (upper & lower) 200 SS (16 x 18) 8 14949 Plate, Location 6, 12, 24 14995 Plate, Location