User guide

Section 3: Installation
12/09 3 0596-0315-01 Rev B
Section 3 Installation
3.1. PRIOR TO INSTALLATION
1. Unpack and Check contents
2. Find best location
3.1.2 Unpacking
Follow these guidelines when unpacking all equipment:
 Check in all components and accessories according to your order.
 Keep the shipping container and packing material for future use.
 Remove all components from their packing material, checking against the invoice that they are
accounted for and not damaged. If damage has occurred:
─ Advise the shipper immediately, if damage has occurred.
─ Order any parts necessary to replace those which have been damaged.
 Check the packing list.
 Collect all necessary installation manuals for the equipment and accessories.
 Open the equipment and perform an inspection, making certain that all hardware, electrical
connections and printed circuit assemblies are secure.
 Do not reinstall the cover if the final installation is to be performed after the pre-installation Checkout.
3.1.3 Finding the Best Location
Position the equipment with these points in mind:
 Intense direct sunlight can harm the display.
 Do not locate near magnetic material or equipment/Indicators which use magnets in their design.
 Avoid areas which have extreme variations in room temperatures. Temperatures outside the
Indicator’s specifications will affect the weighing accuracy of this product.
 Do not open the Indicator if there is evidence of damage to it or any other scale component or
supporting structure.
 When selecting the right location for the Indicator and the scale, keep the components completely
away from all high water, such as low-lying areas that may flood, and away from any drain pipes.