User guide

HI 1746-WS WEIGH SCALE MODULE
3-2
• Wear an approved wrist-strap
grounding device when handling
the module.
• Touch a grounded object or sur-
face to rid yourself of any elec-
trostatic discharged prior to
hand
ling the module.
• Handle the module from the
bezel in
front away from the con-
nector. Never, NEVER t
ouch the
connector pins.
• Never install, remove, or wire
any
module while the power is
on. Always disconnect the power
from the SLC when working on
the module.
• Do not install the module right
next
to an AC or high voltage DC
module.
Setting the Jumper
f
or Local or
Remote Mode of
Operation
Step 1. Remove the module from its package by
grasp
ing the front cover. (See Fig. 3-1)
FIG. 3-1 HI 1746-WS WEIGH MODULE IN
PROPER ORIENTATION
Step 2. Place the jumper either
on OFF (Default)
for Local or ON for Remote operation.
(See Fig. 3-2)