User guide

HI 1746-WS WEIGH SCALE MODULE

4-2

FIG. 4-1 MODULE LEDS

LEDS

Run/Fault LED Flashing Green Self-Test is running.

Flashing Green (5Hz Flash Speed) - Self-Test

iled, or no calibration.

Steady Green Self-Test Passed

Flashing Red Weigh Scale Module has a fault.

Steady Red Module has a major problem.*

NOTE: * Contact Hardy Customer Support for assistance.

Comm. LED Steady Green Normal Operation

Flashing Green Block transfer is being performed.

LED is Off No Communication

C2 LED Steady Green A C2 load cell(s) has been found.

LED is Off No C2 load cells have been found.

Steady Red Unable to read loadcell data or the

load

cell data is in error.

Setting Up

Communic

ations

Between the SLC and

the HI 1746-WS Weigh

Scale Module

To set up communication between the SLC 5XX and

the HI

1746-WS Weigh Scale Module you will need

to select or enter the following information into the I/

O Configuration section of your software: