User guide

Chapter 6 - Operating Procedures
6-3
13 Setpoint 2 Mode
Bit Setpoint Mode
0 ROC (Rate of Change)
1Gross
2Net
3 Gain Mode (0 = gain in wght)
(1 = loss in wght)
4 Force low
5 Force high
6 Excitation Error
7 No Excitation Error
8-15 Currently Not Used
14 Weight Functions
Bit Weight Functions
0Zero
1Tare
2 Write Non-Volatile
3 Apply Settings
4 Reload Non-Volatile
5Cal Low Cmd
6Cal High Cmd
7 C2 Cal Cmd
8 - 15 Currently Not Used
WORD PARAMETER
TABLE 6-1: BLOCK TRANSFER, READ