Manual

Chapter 4 - Setup
4-11
• #define ERRORADCONVERT 0x0001
• #define ERRORADFAILURE 0x0002
• #define STATUSINMOTION 0x0040
• #define ERRORNOCAL 0x0080
• #define ERROREEPROMWRITE 0x0100
// an error occurred when writing to non-
volatile memory
• #define NVRDEFAULTED 0x0200 // set
if SETDEFAULTPARAMS command was
given
• #define STATUSCHANENABLED
0x8000 // set if channel is enabled
Name Description Default
ChanActive 16 bit integer, set to 1 if the
channel is active, 0 if not
active
1
Metric 16 bit integer which
determines the format of
weight values. Metric is the
sum of 3 fields:
1 If bit 7 is set (0x80),
weight is displayed in
Kilograms
2 If bit 6 is set (0x40),
weight is displayed as a
floating point
3. If bit 6 is not set, Weight
is displayed as an
integer, with the 3 least
significant bits giving the
number of decimal
places
0 (weight in pounds, integer
format, 0 decimal places)
WAVER SAVER 16 bit integer
0 No WAVERSAVER
14 Hertz
22 Hertz
31 Hertz
4 0.5 Hertz
5 0.25 Hertz
3 (1 Hertz)
TABLE 4-1: PARAMETERS