Instruction Manual

Chapter 5 - Block Transfers
5-21
Block Write
Command Number
56: Configuration of
Rate-of-Change
TABLE 5-23: BLOCK WRITE COMMAND NUMBER 56: CONFIGURATION OF RATE-OF-CHANGE
BLOCK WRITE COMMAND NUMBER 56: Configuration of Rate-of-Change
START
WORD DEFINITIONS: #WORDS WORD
Command number: A value of 56 (decimal)
bit 0 0
bit 1 0
bit 2 0
bit 3 1
bit 4 1
bit 5 1
bit 6 0
bit 7 0
bit 8 - 15 Reserved for future use
10
Displayed Rate-of-Change time units: A value of 0 to 2 (0 = sec, 1 = min, 2 = hr) 1 1
Rate-of-Change timebase evaluation period: A value of 0 to 15 from list below:
0 = 1 second 4 = 5 seconds 8 = 15 seconds 12 = 240 seconds
1 = 2 seconds 5 = 6 seconds 9 = 30 seconds 13 = 450 seconds
2 = 3 seconds 6 = 10 seconds 10 = 60 seconds 14 = 900 seconds
3 = 4 seconds 7 = 12 seconds 11 = 120 seconds 15 = 1800 seconds
12
TOTAL NUMBER OF WORDS 3