Instruction Manual

Chapter 5 - Block Transfers
5-25
Block Write
Command Number
61: Auto Zero
Tolerance
TABLE 5-28: BLOCK WRITE COMMAND NUMBER 61: AUTO ZERO TOLERANCE
Block Write
Command Number
62: Waversaver/
Excitation Monitor
HI 2151/30WC Only.
TABLE 5-29: BLOCK WRITE COMMAND 62: WAVERSAVER/EXCITATION MONITOR
BLOCK WRITECOMMAND NUMBER 61: Auto Zero Tolerance
START
WORD DEFINITIONS: #WORDS WORD
Command number: A value of 61 (decimal)
bit 0 1
bit 1 0
bit 2 1
bit 3 1
bit 4 1
bit 5 1
bit 6 0
bit 7 0
bits 8 - 15 Reserved for future use
10
Auto Zero Tolerance
A 16 bit number in proper integer format
11
TOTAL NUMBER OF WORDS 2
BLOCK WRITE COMMAND NUMBER 62: Waversaver/Excitation Monitor
START
WORD DEFINITIONS: #WORDS WORD
Command number: A value of 62 (decimal)
bit 0 0
bit 1 1
bit 2 1
bit 3 1
bit 4 1
bit 5 1
bit 6 0
bit 7 0
Waversaver
bits 8 - 15 Waversaver setting (1-5) (Error #87 returned if an error)
10
Excitation Monitor
bit 0 0 = Disable Excitation Monitor, 1 = Enable Excitation Monitor
bits 1 - 15 Reserved for future use
11
TOTAL NUMBER OF WORDS 2