Instruction Manual

Chapter 5 - Block Transfers
5-31
71 47 Stop bits must be 0 or 1
72 48 Data length must be 0 or 1
73 49 Control (Hardware or Software) must be 0 or 1
74 4A Device Address must be between 0 and 99
75 4B Echo request must be a 0 or 1
Error Code for Block
Write Command #53
76 4C Tare greater than span
Error Code for Block
Write Command #51
77 4D Blind unit option only
Error Code for Block
Write Command #55
96 60 Load cell count error
97 61 No C2™ load cells found
98 62 Load cell capacity/sensitivity error
99 63 Load cell checksum error
100 64 Too many significant digits after the decimal to be
displayed.