Owner's manual

Chapter 7 - Operation
7-15
Dip Switch #1 (S3)
Position Bit Function ("ON" position)
1 80 Multi-drop
2 01 Calibrate toggle (Non NBS applications)
3 40 Serial command lockout (Requests OK)
4 02 Option menu lockout
5 04 Set point menu lockout
620Spare
7 08 Lb/Kg, N/G, Tare and Zero lockout
8 10 Zero track
SUB-CMD Meaning
Dip Switch #2 (S2)
Position Bit Function ("ON" position)
1 08 Ignore incoming checksums
2 10 On is averaged peak hold, Off is instantaneous
peak hold
320NBS
4 04 NBS Re-Cal toggle switch
540Spare
680Spare
702Spare
801Spare
SUB-CMD Meaning
E Excitation Monitor
ERR
OKK
OFF
3. E IT
®
serial command
Results Description
OKK No Errors Detected
ERR Error Detected
OFF IT is Not Turned On
4. I Load cell input command. Used primarily to
check the analog input section of the unit. The command
will return the number of averaged counts that is currently
being read from the load cell input.