Owner's manual

Chapter 5 - Setup
5-3
3/Lb Kg • Toggles between read pounds (Lb.) or kilograms (Kg.).
• The key also enters the digit "3."
4/↑ • This key moves forward through a menu, step by step and will wrap
to the beginning of the menu.
• The key also enters the digit "4"
• Resumes the Self Test
FIG. 5-2 FRONT PANEL, BAR GRAPH DISPLAYED
5/← • Moves the decimal point position to the left when in Calibration
Mode.
• Selects user selectable formats in the serial and optional BCD
menus.
• The key also enters the digit "5".
6/Set Pt • This key is used to enter the Set point Menu
• Values for standard and optional Relays.
Set point Values
Deadband Values
Preact Values
• The key also enters the digit "6".
7/Option • This key selects the standard serial ports and available option
menus:
• Rate of Change
Bar Graph