Owner manual

HI 6600 Series Modular Sensor System User Guide
Page | 113
Appendix A
Communications I/O Table
• • • • • •
I/O Tables for Communications to PLCs
The following I/O table description is common for the following communication protocol in the HI 6600
series:
 EtherNet/IP
 Profibus-DP
 Modbus-TCP
 Modbus-RTU (over 485)
For a full list of command parameters, please see Appendix B, Default Parameter IDs and Values under
Communications Parameters
.
OUTPUT table Bytes INPUT table Bytes
Command 4 Command Echo 4
Aux Comm and Informatio
n
4 Command Status 4
Parameter ID 4 Parameter ID 4
Parameter Value 4 Parameter Value 4
Selected WPM1 (M1) 4 M1 Status 4
M1 reserved 1 4 M1 Net Weight 4
M1 reserved 2 4 M1 Gross Weight 4
M1 Parameter ID 4 M1 Parameter Value 4
Selected WPM2 (M2) 4 M2 Status 4
M2 reserved 1 4 M2 Net Weight 4
M2 reserved 2 4 M2 Gross Weight 4
M2 Parameter ID 4 M2 Parameter Value 4
Selected WPMn (Mn )4Mn Status 4
Mn reserved 1 4 Mn Net Weight 4
Mn reserved 2 4 Mn gross Weight 4
Mn Parameter ID 4 Mn Parameter Value 4
Common
Header
Module 1
Information
Module 2
Information
Module n
Information