Owner manual

HI 6600 Series Modular Sensor System User Guide

Page | 79

The following list explains the operation and features available if the correct 4

alphanumeric character

password is entered by the operator.

Keypad Password:

 The current keypad lock setting is saved.

 The MODE, TARE, and ZERO buttons are unlocked, enabling the operator

to tare or zero the scale.

 Pressing the ENTER button a second time returns the keypad lock to its

original setting.

Configuration Password:

 The current keypad lock and configuration lock setting are saved.

 The TARE and ZERO buttons are unlocked, enabling the operator to tare or

zero the scale.

 The CONFIG button is also enabled allowing the operator to open the

configuration menus.

 When the operator exits the configuration menu, the display lock and keypad

lock are set to their original settings. If no

changes to the configuration lock

or password parameters were made the configuration lock is also set to its

original

lock settings; otherwise the latest configuration security settings are

used.

The Configuration Lock

While the configuration lock is enabled the Configuration button is disabled, preventing the

operator from viewing or modifying

any instrument parameters.

If the CONFIG button is pressed the “Enter Password” page will appear on the display. At

this level of security the operator can

enter only one possible password for the configuration

lock.

The configuration lock flowchart shows the options and features when the configuration

lock is enabled.