User manual

1. Plug the transmitter into the 1/4" jack socket of the instrument whose signal is to be
transmitted and bring the on / o switch on the transmitter to the [ON] position.
ð
The transmitter ashes ve times. The LED indicator lights up during transmission.
When the data transmission is stable, the LED indicator on the receiver lights up
constantly. If the signal is too weak, the LED ashes. Then reduce the distance
between transmitter and receiver.
2. Select the same transmission channel on the transmitter and receiver by pressing the
channel selection button. The default setting when switching on is "Channel 1". We rec‐
ommend using this channel when there is no radio interference. Otherwise, try oper‐
ating on a dierent channel.
3. To switch the transmitter o, move the on / o switch to the [OFF] position.
6.3 AirBorne Go Mobile APP ("Mighty Amp")
The free AirBorne Go Mobile APP "Mighty Amp" is available for Android and IOS devices. It can
be downloaded from the Google Play Store, for instance.
Connecting and coupling the
transmitter
Operating
AirBorne Go
29