User manual

1 Display
2 Magnetic charging contacts for the transmitter
3 Footswitch to activate the tuner mode
Tuner mode can only be activated when transmitter and receiver are paired.
4 [OUT] | 1/4" mm jack socket as unbalanced audio signal output for direct connection to an amplier
5 LED to indicate the coupling between transmitter and receiver.
If transmitter and receiver have not been successfully paired, the LED ashes orange. If the coupling is successful, the
LED turns o.
6 ID indicator | LED to indicate the selected channel (red = channel 1, green = channel 2, blue = channel 3, purple =
channel 4)
7 [CABLE TONE] | rotary control for selecting a virtual cable length to simulate the inuences that a conventional cable
has on the transmission between the instrument and the amplier.
8 Main switch. Turns the device on and o.
9 [DC IN] | connector for the supplied power adapter for power supply
10 [DC OUT] | connection to power an additional pedal
Connections and controls
20
AirBorne Pro Instrument
Wireless System