User manual

9 Troubleshooting
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom Remedy
No sound 1. Check the power supply of transmitter and receiver.
2. Make sure that transmitter and receiver are operating in the same frequency
range. The frequency range can be found on the devices.
3. Are transmitter and receiver set to the same channel and ID?
4. Test the connection between the receiver and the connected audio. Is the
connected audio device turned on and does the signal level at the output of the
receiver match the input requirements of the audio device?
5. See if the audio transmission works when you move the transmitter closer to
the receiver.
6. Make sure that no metal objects near the transmitter or receiver obstruct the
transmission.
Transmission is interrupted. 1. Modify the orientation of the antennas.
2. If you use more than one wireless system at the same time, check the used
frequencies and channels.
Troubleshooting
32
AirBorne Pro Instrument
Wireless System