User manual

5 Connections and controls

CAUTION!

Possible hearing damage

Using headphones for a prolonged period and at high volume can

cause hearing damage.

Avoid using the device at high volume, especially when using head‐

phones.

NOTICE!

Risk of breakage, possible deformation

When placing the instrument with the fretboard down, there is a risk of

damaging the ngerboard and the tailpiece.

Avoid any compressive load on the rear of the instrument, if it is placed

for the assembly or for service work with the fretboard down on a solid

surface.

Before connecting ampliers or headphones, the volume controls of the

cello and the equipment to be connected must be set to "minimum". This

avoids loud crack noises when switching on.

5.1 Connecting and inserting the battery

The instrument is operated with a 9 V block battery. The battery is not included in the

scope of delivery.

Open the battery compartment cover on the back of the instrument. Clamp the

power cable with the correct polarity to the battery. Insert the battery into the bat‐

tery compartment and close the battery compartment cover. It must audibly click

into position.

Connections and controls

DB01, DB02

Electric Upright Bass