User manual
Table Of Contents
5 Connections and controls
NOTICE!
Risk of breakage, possible deformation
When placing the instrument with the fretboard down, there is a risk of
damaging the ngerboard and the tailpiece.
Avoid any compressive load on the rear of the instrument, if it is placed
for the assembly or for service work with the fretboard down on a solid
surface.
Before connecting an amplier, the volume controls of both violin and amp
must be set to "minimum". This avoids loud crack noises when switching on.
5.1 Connecting the instrument cable
You nd the connector for the instrument cable (1/4" jack, mono) at the side of the
instrument.
5.2 Adjusting Volume and Tone
The controls to adjust the volume [VOL] and the tone [TONE] are located at the side of
the instrument.
Connections and controls
HBV 800
11
Electro-acoustic violin