User manual

1. Connect the device to your mobile end device or PC using the supplied USB cable.
ð
The device is detected automatically.
2. Turn the device on using the main switch.
ð
The LEDs under the foot switches light up briey. The display shows the current
status of the device.
You can switch between 6 preset and 2 individually programmable congurations.
1. Depending on the desired conguration, press [1]…[4] or [A]…[D] and keep the button
pressed.
2. Switch the device o and on again at the main switch.
ð
The selected conguration is activated. The display will show the selected congura‐
tion.
Turning the unit on
Select conguration
Operating
MIDI foot switch
20