User manual

1. Press [/SET] and hold down the button.
2. Switch the device o and on again at the main switch.
ð
The setup for individual congurations is activated. The display shows the sub‐
menus ‘MIDI.CH’ , ‘CUS1’ and ‘CUS2’ .
3. Press [2] r [3] to switch between the submenus.
In the ‘MIDI.CH’ submenu, MIDI channels can be assigned to the preset congurations.
1. Use [/CHG] or [/SET] to select the desired conguration.
2. Press [B] or [C] to select the desired MIDI channel for the conguration.
ð
The selected settings remain stored even after the device is turned o.
In the submenus ‘CUS1’ and ‘CUS2’ , parameters for individually set congurations can be set.
1. Use [/CHG] or [/SET] to select the desired parameters.
2. Press [B] or [C] to select the desired option for the parameter.
ð
The selected settings remain stored even after the device is turned o.
Operating
MIDI foot switch
22