User manual

Parameter Option Function
KEY D MOD PC#, CC# PC: Program change MIDI command
CC: Control change MIDI command
KEY D CC# 1…127 Command number of the control change MIDI command
KEY D Tog OFF, ON ON: The sub-parameters change between 0 and 64
Particular setups may cause conicts. When you set 4 patches for a group, the buttons
[1] to [4] are not available in the program change mode. When you set 5 patches for a
group, the buttons [1] to [3] are not available in the program change mode. Follow
the setup order from “Bank Move” to the end.
You can use this function to reset the device to its factory default setting.
1. Press [/SET] and [ /CHG] and hold down both buttons.
2. Turn the device o using the main switch.
ð
The device is reset to the standard settings.
Restore factory setting
Operating
MIDI foot switch
26