User manual

Table Of Contents

6 Operating

Connect the device to a voltage source using the supplied USB micro cable (type B).

The device is operational. The LEDs under the push buttons light up briey. The dis‐

play shows the current status of the device.

1. Connect the device to your mobile end device, e.g. an iPad or tablet, using the supplied

USB cable (type B).

2. Insert your mobile end device into the provided groove of the device. This way you have

an optimal view of the display of your mobile end device while playing.

3. Set the volume of your mobile end device to 80 to 90 per cent.

4. Connect your instrument to the [L-IN] input jack and set the default gain value to 0 dB.

5. Connect headphones to the headphone output or connect a monitor to the line

output[(L-OUT], [R-OUT]).

Turning the unit on

Using a device with mobile end

devices

Operating

MP-500