User manual

6. Start an audio software of your choice on the mobile end device and set an extremely
low latency time.
Activate the MIDI controller the rst time you use the software.
ð
You can now control the device with the app of your mobile end device.
You can switch between six preset and two individually programmable congurations.
1. Depending on the desired conguration, press [1]…[4] or [A]…[D] and keep the button
pressed.
2. Enable the device by connecting the supplied USB micro cable (type B) to a voltage
source.
ð
The selected conguration is activated. The display will show the selected congura‐
tion.
Foot switch Conguration Function
1 JAMP Control of eects of the iOS software JamUp
2 BIFX Control of eects of the Biax FX software
Select conguration
Operating
MIDI foot switch
22