User manual

Table Of Contents

Parameter Option Function

KEY D MOD PC#, CC# PC: Program change MIDI command

CC: Control change MIDI command

KEY D CC# 1…127 Command number of the control change MIDI command

KEY D Tog OFF, ON ON: The sub-parameters change between 0 and 64

You can connect the device to an external MIDI keyboard via the [MIDI OUT] MIDI output. The

device sends control commands in standard MIDI format and can be used as an independent

MIDI controller pedal to control other hardware devices.

You can use this function to reset the device to its factory default setting.

1. Press [L-IN] and [R-IN] simultaneously and keep both buttons pressed.

2. Enable the device by connecting the supplied USB micro cable (type B) to a voltage

source.

The device is reset to the standard settings.

Restore factory setting

Operating

MIDI foot switch