User Manual TableAmp V2 BlueTooth Guitar Combo
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 29.08.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
TableAmp V2 BlueTooth Guitar Combo
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – high-voltage. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended to be used for amplification and playback of signals from musical instruments with electromagnetic pickups. Any other use or use under other operating condi‐ tions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use sufficient ear protectors. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains.
Features 3 Features Special features of the device: Built-in Bluetooth function 30 watt RMS 5" woofer 1" tweeter Connections: – Mic / Line input, designed as XLR / 1/4" combo socket – AUX input, designed as 3.5 mm phone socket – Headphones output, designed as 3.
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Connections and controls 5 Connections and controls Top side ö * 14 TableAmp V2 BlueTooth Guitar Combo # $ % & ' ( )
Connections and controls 1 Bluetooth button | to establish a Bluetooth connection, press and hold the Bluetooth button for 2 seconds to search for Bluetooth-enabled devices ready for pairing. The Bluetooth button flashes blue. The Bluetooth list of the device to be paired displays ‘TableAmp’ . Accept the connection. A short beep will sound when the connection was established success‐ fully and the Bluetooth button will turn solid blue.
Connections and controls Rear panel + , -. / 10 [GUITAR/MIC] / [SENSITIVITY] | signal source selector switch (guitar or microphone) 11 [XLR - AUX INPUT] / [GUITAR/MIC] | Mic / Line input, designed as XLR / ¼" jack combo 12 Socket for connecting the supplied plug-in power supply 13 [STATUS] | Control LED for power supply. This LED lights up when the device is turned on or in Standby mode. 14 [POWER] | main switch. Turns the device on and off.
Technical specifications 6 Technical specifications Speaker 1 × 5" woofer 1 × 1" tweeter Input connections Output connections Power supply External power adapter AUX in 1 × 3.5 mm phone socket Mic/Line 1 × XLR / ¼" jack combo socket Headphones 1 × 3.5 mm phone socket Output power 30 W (RMS) Frequency range 60 Hz to 20 kHz Signal-to-noise ratio ≥70 dB Bluetooth® Frequency range 2.402 GHz … 2.480 GHz Max. transmission power –90.5 dBm Standard Version 5.
Technical specifications Weight Ambient conditions 3.
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment 1/4" TS phone plug (mono, unbalanced) 1 Signal 2 Ground, shielding 1 Signal (in phase, +) 2 Signal (out of phase, –) 3 Ground 1 Signal (left) 2 Signal (right) 3 Ground, shielding 1/4" TRS phone plug (mono, bal‐ anced) Three-pole 1/8" mini phone jack (stereo, unbalanced) 20 TableAmp V2 BlueTooth Guitar Combo
Plug and connection assignment XLR plug (balanced) 1 Ground, shielding 2 Signal (in phase, +) 3 Signal (out of phase, –) 4 Shielding on plug housing (option) TableAmp V2 BlueTooth Guitar Combo 21
Protecting the environment 8 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.