Motorcycle User Manual

19
Assembly
• Fit the handlebar harness plug
up through the rectangular hole
in the vehicle body.
TM
Handlebar
Harness Plug
Rectangular Hole
T
M
See
Inset
Handlebar
Harness Plug
Rectangular Hole
35
• Align the screw holes in each handlebar with the screw
holes in the front fork.
• First, insert two #8 x
3
/4" screws through the lower holes
in the front fork and into each lower hole in each handlebar
and hand tighten. Do not tighten the screws completely.
These screws will be tightened in step 54.
•Next, insert two #8 x
3
/4" screws through the upper holes
in the front fork and into each upper hole in each handlebar
and hand tighten. Do not tighten the screws completely.
These screws will be tightened in step 54.
Handlebars
Handlebar
Harness
34
•Turn the front fork around so the front is facing you.
• Slide the left handlebar through the upper and lower
holes in the front fork.
Front Fork
Left
Handlebar
33