Motorcycle User Manual

21
•Insert the handlebar harness into
the wire clip on the side of the
vehicle body.
Assembly
T
M
Wire
Clip
Handlebar
Harness
See
Inset
Wire
Clip
Handlebar
Harness
41
T
M
• Slide the fork axle up through the bottom of the front
fork, through the frame neck and steering stop, and out
the top of the front fork.
• Fit a .354 (small diameter) cap nut on the end of the
fork axle.
• Support the fork axle and tap the cap nut with a hammer
to secure it on the end of the axle.
Hint: You may need the help of another adult to hold the
front axle in place while you secure the cap nut.
• Pull on the .354 cap nut to make sure it is secure on the
fork axle.
.354 (Small Diameter)
Cap Nut
Fork Axle
Front Fork Assembly
.354"
.354 Cap Nut
40