Motorcycle User Manual

23
• Slide the fender onto the ends of the handlebars. Make
sure the pegs on the fender slide over the tabs on the
front fork.
Handlebar
Front
Fork Tabs
Front
Fork Tabs
Handlebar
Fender
Assembly
48
T
M
• Fit the tachometer to the fork cover.
•Insert two #8 x
3
/4" screws into the tachometer
and tighten.
Tachometer
Fork
Cover
47
• Fit the tachometer cover onto the tachometer housing.
The tab on the tachometer cover should fit into the notch
in the tachometer housing.
•Insert a #8 x
3
/4" screw into the tachometer cover
and tighten.
Tachometer
Housing
Ta b
Notch
Tachometer
Cover
T
M
• Fit the tab on the front of the seat into the slot near
the tank.
• Push down firmly near the back of the seat to “snap” it
to the vehicle.
Hint: You will need to remove the seat to access the
high speed connectors and to charge the 12 volt battery.
To remove the seat, press the tab at the back of the seat
and lift.
Tank
Slot
Seat Tab
Seat Tab
45
46
Tachometer
Cover
PUSH
HERE