User Guide

16
Assembly
T
M
Steering
Bushing
Vehicle
Frame
Neck
•Position the vehicle frame so that the front faces you.
• Fit a steering bushing underneath the neck of the
vehicle frame.
•Insert a #8 x
3
/4" screw into each end of the steering
bushing and tighten.
Front View
21
• Fit the headlight lens onto the headlight housing.
•Insert three #8 x
3
/4" screws into the headlight lens
and tighten.
Headlight
Lens
Headlight
Housing
22
Front Fork
Lower Hole
Lower
Hole
Front Fork
Cover
• Fit the front fork into the front fork cover.
•Insert two #8 x
1
/2" screws into the lower holes in the
front fork and tighten.
23
24
Headlight
Assembly
Center
Holes
Front Fork
Assembly
•Position the headlight assembly with the lens down on a
flat surface.
•Fit the front fork assembly onto the back of the headlight
assembly, as shown.
•Insert two #8 x
3
/4" screws through the center holes in
the front fork assembly and into the headlight assembly.
• Tighten the screws.