User's Manual Part 2

11
SETTINGS
11- 41
4. Touch to display the suc-
ceeding items.
5. Touch [Estimation and Summary].
The [Estimation and Summary]
screen appears.
To turn on/off the estimation and sum-
mary display
On the [Estimation and Summary]
screen, touch [Initial Display] so that
the checkmark is removed to turn off
the estimation and summary display.
To turn the display on, touch [Initial
Display] again so that the checkmark
is added again.
Examples of estimation display and
summary display are shown below.
O
Example of an estimation display
O
Example of a summary display
To specify the content of estimation display
1. On the [Estimation and Summa-
ry] screen, touch [Arrival est].
The screen changes as follows.
2. Touch the desired content that will
be displayed during route guidance.
You can select one from among the
following four options.
O
[Arrival time to Destination]
O
[Distance to Destination]
O
[Arrival time to Via point]
O
[Distance to Via point]
TIP
[Arrival time to Via point] and
[Distance to Via point] are available
only when one or more via points
(transit points) have been set.