User's Manual

acters in the character bar: turning and
pressing the controller each time.
or
X
Press the corresponding key on the
COMAND Online number keypad.
Every character selected will be transmit-
ted immediately.
Transmitting a phone book entry as a DTMF
character string:
X
To select Name: turn the controller and
press to confirm.
X
To select the required phonebook entry:
turn the controller and press to confirm.
The entry is sent as a DTMF character
string.
Changing back to the call display:
X
To select Back: turn the controller and
press to confirm.
i
DTMF tones can also be transmitted
using
LINGUATRONIC; see the separate operat-
ing instructions.
Transferring a call to the rear compart-
ment and back again
You can transfer a call to the telephone con-
nected to the rear unit.
X
To switch to the menu bar: slide VÆ the
controller.
X
To select Send call to rear: turn and
press the controller.
The rear-compartment telephone (hand-
set ) rings. In the bottom menu bar, the
Call to front entry is now visible.
Retrieving the call:
X
To select Call to front: turn and press
the controller.
Calls with several participants
Rejecting or accepting a waiting call
The mobile phone network provider must
sup-
port and activate the call-waiting function.
Depending on the mobile phone used, the
system behaviour differs when accepting a
call.
If you have a call in progress and receive
another call, a new window appears in the
display. You also hear a tone. You can accept
or reject the call.
Rejecting:
X
To select Reject: turn the controller and
press to confirm.
or
X
Press the ~ button on COMAND Online
or on the multifunction steering wheel.
Accepting:
X
To select Accept
: turn the controller and
press to confirm.
or
X
Press the 6
button
on
COMAND
Online
or on the multifunction steering wheel.
The system behaviour after accepting the
incoming
call
depends on your mobile
phone.
R
The mobile phone supports the call waiting
function (via Bluetooth
®
) when:
the previously active call is held. You can
then switch back and forth between both
calls (call waiting) (Y page 438).
R
The mobile phone does not support the call
waiting function (via Bluetooth
®
) when:
the previously active call is ended.
This is also the case if you accept the wait-
ing call using LINGUATRONIC (see the sep-
arate operating instructions).
Valid in both cases: if you accept the waiting
call using the mobile phone, the active call is
put on hold. You then have two calls. The call
you have just accepted is active.
The COMAND display changes. If you con-
tinue to operate functions on the mobile
phone, the COMAND Online display may dif-
fer from that of the mobile phone.
Telephone
437
COMAND Online
Z