User's Manual

Increasing the volume on COMAND
Online
X
To select Options
in the AUX display: slide
V¬
and press the controller.
A menu appears.
X
To select Mono/stereo:
turn
and
press
the
controller.
A menu appears.
X
Select Mono
or
Stereo.
The # dot indicates the current setting.
X
Select Volume.
X
Select Standard or Boost.
Standard:
the volume of the external
audio
source is adjusted to a standard value.
Boost: the volume of the external audio
source is raised by approximately 10 dB.
The # dot indicates the current setting.
X
To switch traffic announcements on or off:
set O to TA or remove.
A device which is connected as an external
audio source may seem quieter or louder in
the vehicle, or the usual maximum volume
cannot be achieved. On some devices, it is
possible to adjust the volume separately. In
this case, start at a medium volume and
increase it gradually. This enables you to
determine
whether the system is able
to play
the music at high volume without distorting
it.
Video AUX operation
Connecting external video sources
G
WARNING
External video sources may have different vol-
umes, which can mean that system
messages
such as traffic announcements and navigation
system announcements are much louder. If
necessary, please deactivate the system mes-
sages or adjust their volume manually.
Video AUX is another option for showing vid-
eos using COMAND Online.
To connect an external video source to the
video AUX, you will require a video AUX cable.
i
If you only use an audio AUX cable, you
will only be able to hear the sound from the
video being played.
Video display is not possible on the driver's
side while the vehicle is in motion.
Switching to video AUX mode
X
Connecting external video sources.
The
socket
for
the
video
AUX
jack is located
in the stowage compartment in the centre
console.
The video AUX is not selected automati-
cally.
X
To select Media in the main function bar:
turn the controller and press to confirm.
The carousel menu appears.
X
To select AUX:
slide V¬ the controller and
press it.
X
Select Audio/video
.
A Source type selection menu
appears.
X
Select Video.
The # dot indicates the current setting.
If Video
is selected, the video of
the exter-
nal video source will appear, as long as the
video source is connected and playback
selected.
Media
519
COMAND Online
Z